HES-5106SFP+
6-Port Managed 10G N-base-T Ethernet CPE Switch
Connection Technology System (CTS) HES-5106SFP+ is a CPE switch with 4-Port 10/100/1000Base-T RJ-45, 1-Port 1/2.5/5/10G NBase-T RJ-45, and 1 additional 1/10Gbps SFP+ fiber slot. It is housed with an eye-catching pearl-white case and supports conversion between 10/100/1000Base-T, 1/2.5/5/10G N-Base-T, and 1/10G Base-X network. Also, HES-5106SFP+ is fully compliant with IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3an, and 802.3ae standards. The operation status can be monitored through the comprehensive LED display.
Environmental Condition Operation: 0˚C ~ 40˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 230 x 149 x 31.1 mm (W x D x H)
Weight: 0.6 Kg
Features
Equipped with the 1/2.5/5/10G RJ-45 port, HES-5106SFP+ can connect to high performance 11ac Wi-Fi AP.
And the 10G fiber uplink slot enables HES-5106SFP+ to handle extremely large amounts of data transmission in a high performance environment.
10G
Equipped with 10G data transmission capacity designed to fulfill the ever-increasing demand for higher bandwidth which is essential for traditional Internet service and premium service alike
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
Power Down Trap
Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Fast and Secured Installation
Manage and secure the fiber cable/connector with a management tray, and hence simplify a greenfield deployment
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and provides a stable IPTV service with high quality
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Specification
Interface
- Front Panel:
– 4 x 10/100/1000Mbps RJ-45
– 1 x 1G/2.5G/5G/10G RJ-45 - Rear Panel:
– 1 x 1G/10Gbps SFP
– 1 x Reset Button
LED
- Power
- Status
- WAN
- LAN 1~5
Power Requirement
- External Power Adaptor
- Input AC: 100V~240V 50/60Hz
- Output DC Rating: 12V/2.1A
- Power Consumption (Max.):
- AC Side: 14.2W
- DC Side: 12.86W
Hardware
- MAC address table: 16K
- Non-Blocking Switching Fabric: 48Gbps
- Packet Buffer: 12Mbit
- Jumbo Frame: 9K Bytes
- Store and Forward Switching Mechanism
- Flash : 32M Bytes
- RAM : 128M Bytes
Environmental Condition
- Operation: 0˚C ~ 40˚C
- Storage: -20˚C ~ 60˚C
- Humidity: 5% ~ 90%, Non-condensing
Dimension & Weight
- Size: 230 x 149 x 31.1mm (W x D x H)
- Weight: 0.6 Kg
Model
Model | Fiber Port | 10G TP Port | 1G TP Port | Power Source | ||||
Speed | Type | Port | Speed | Port | Speed | Port | ||
HES-5106SFP+ | 1/10 | SFP+ | 1 | 1/2.5/5/10 | 1 | 10/100/1000 | 1 | External power |
Download
Model | Info | Version | Download file |
HES-5106SFP+ | Datasheet | A04 | |
HES-5106SFP+ | User's Manual (HW) | V1.2 | |
HES-5106SFP+ | User's Manual (NMS) | V1.1 | |
HES-5106SFP+ | Firmware | 1.00.0L | |
HES-5106SFP+ | MIB-file | 1.00.0L | |
CTS P2P CPE Switch Tailored made for FTTH Installation | As the fiber end point to the residential premises, CTS HES series is the perfect choice for installers, operators and home-users. With the easy-to-install cable management solution (FCT-S) and simple white housing design, HES is home-friendly with sufficient LAN ports and powerful processing capacity for users to connect their setup boxes, WFi APs, VoIP, and more. With the success in our 1G fiber CPE switch HES-3106 and HES-3109 series, CTS proudly introduce and deliver the world first 10G NBase-T Fiber CPE Switch HES-5106SFP+ to fulfill the needs of next stage FTTH deployment. | ||
CTS Delivers World First 10G NBase-T Fiber CPE Switch for FTTH Deployment | HES-5106SFP+ provides a user-friendly but advanced IPv4/IPv6 management interface and abundant L2 switching functions. In addition to that, the manufacturing process is in Taiwan which meets FCC, CE and RoHS. It is the best investment for businesses and SOHOs expanding or upgrading their network infrastructure with cost-effective and high-speed for FTTX solutions. |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.