EPS-5112-8BT
8 x 10/100/1000Base-T RJ-45 with
IEEE 802.3af/at/bt PoE++ Injector +
2 x 100M/1G/2.5G/5G/10GBase-T RJ-45 +
2 x 1/10GBase-R SFP+
Managed Layer 2 PoE Switch
EPS-5112-8BT is a layer 2 managed PoE switch equipped with 8 ports of 10/100/1000Base-T RJ-45 with IEEE 802.3af/at/bt PoE injector, 2 ports of 100M/1G/2.5G/5G/10GBase-T (compliant with NBase-T standard), and 2 ports of 1/10GBase-R SFP+. The SFP+ slots can accommodate a wide range of SFP/SFP+ transceivers including single-mode, multi-mode, and WDM.
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 210 x 290 x 44 mm (W x D x H)
Weight: 2.3 Kg
Features
EPS-5112-8BT is a layer 2 managed PoE switch equipped with 8 ports of 10/100/1000Base-T RJ-45 with IEEE 802.3af/at/bt PoE injector, 2 ports of 100M/1G/2.5G/5G/10GBase-T (compliant with NBase-T standard), and 2 ports of 1/10GBase-R SFP+. The SFP+ slots can accommodate a wide range of SFP/SFP+ transceivers including single-mode, multi-mode, and WDM.
Multi-G
As bandwidth demand soars to new heights, 10G/5G/2.5G/1G/100MBase-T ports allow users to get up to the speed of 10/5/2.5Gbps
Smart Fan
Smart Fans adjust fan speed based on temperature to control power usage and reduce noise, instead of just dissipating heat
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
10G
Equipped with 10G data transmission capacity designed to fulfill the ever-increasing demand for higher bandwidth which is essential for traditional Internet service and premium service alike
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
Multicast VLAN Registration
Reduce the bandwidth required to distribute IPTV multicast streams by means of sharing single traffic across different VLANs
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Power over Ethernet
Data flows and the electrical current are carried over the same Ethernet cable. The feature can significantly reduce the otherwise extensive wiring installations
PoE Scheduling
Arrange the PoE schedule and specify the timing of PoE power-on and -off for each port to effectively manage the total power budget
Hardware Overview
Specification
Interface
- RJ-45 Port
-8 x 10/100/1000Base-T RJ-45 with IEEE 802.3af/at/bt PoE++ injector
-2 x 100M/1G/2.5G/5G/10GBase-T RJ-45
- Fiber Port
-2 x 10GBase-SR/LR SFP+ and compatible with 1000Base-X Transceiver
- Console Port
-1 x RS-232 to RJ-45 Serial Port
- Terminal Block
-1 x Digital Input (Dry Contact)
LED
- Power
- Status
- COM
- TP Link/Act/Speed
- F/O Link/Act/Speed
- PoE
Power Requirement
- AC Input: 100-240V, 50/60Hz, 2.5~1.2A
- Max. Power Consumption: 241W (822.3 BTU/h)
Hardware
- MAC Address Table: 16K
- Non-blocking Switching Fabric: 96Gbps
- Throughput @ 64Bytes: 71.4Mpps
- Jumbo Frame: 12K Bytes
- Packet Buffer: 12Mbit
- Store and Forward Switching Mechanism
- Auto-Cross Over for MDI/MDI-X in TP ports
- Auto-Negotiation in TP Ports
- Full/Half Duplex Mode Operation
Environmental Condition
- Operation: 0˚C ~ 50˚C*
- Storage: -20˚C ~ 60˚C
- Humidity: 5% ~ 90%, Non-condensing
EMC/Safety
- FCC Class A, CE
- ESD
– Air Discharge: +/-8kV
– Contact Discharge: +/-4kV
- EFT
– AC Input: +/-1kV
- Surge Protection: +/-2kV
Dimension & Weight
- Size: 210 x 290 x 44mm (W x D x H)
- Weight: 2.3 kg
Topology
Application Diagram
Model
Model | Fiber Port | TP Port | Support Power Source | |||
Speed | Type | Ports | Speed | Ports | ||
EPS-5112-8BT-200W | 1/10Gbps | SFP+ | 2 | 10/100/1000Mbps | 8 with 802.3af/at/bt Injector | Fixed 1 Internal AC |
100M/1G/2.5G/5G/10Gbps | 2 | |||||
Download
Model | Info | Version | Download file |
EPS-5112-8BT | Datasheet | A02 | |
EPS-5112-8BT | User's Manual (HW) | V1.1 | |
EPS-5112-8BT | User's Manual (NMS) | V1.0 | |
EPS-5112-8BT | Firmware | 1.00.0S | |
EPS-5112-8BT | MIB-file | 1.00.0S |