SRS-3106
4 x 10/100/1000Base-T RJ-45+
2 x 100/1000Base-X SFP Managed Rugged Switch
The SRS-3106 features two 100/1000Base-X SFP slots, as well as four 10/100/1000Base-T RJ-45 ports. Its rugged design, advanced features, and wide temperature tolerance (-20˚C ~ 60˚C) make it an ideal solution for demanding environments where network stability is paramount.
Environmental Condition Operation: -20˚C ~ 60˚C
Storage: -30˚C ~ 70˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 56.5 x 110 x 135 mm (W x D x H)
Weight: 0.57 Kg
Housing: Aluminum, IP30
Features
SRS-3106, this 6-port smart rugged managed switch is designed to withstand harsh environmental conditions while delivering resilient network performance. With its wide operational temperature range of -20°C to 60°C, the SRS-3106 is ideal for both indoor and outdoor deployments, ensuring uninterrupted network connectivity even in extreme temperatures.
Built for resilience, the SRS-3106 offers a suite of advanced features to protect and enhance your network’s reliability. Dual power input provides redundancy, preventing downtime in case of power failures.
Dual rate fiber can automatically sense and adjust to fiber speed changes. Dual image functionality ensures seamless system recovery in case of firmware and software issues. Additionally, loop detection automatically helps prevent network disruptions caused by accidental switching loops.
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
Fanless Design
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment
DIN-rail Installation
Supports DIN-rail installation method
-20 ~ 60 degree C
To boasts an extended temperature range, enabling operation from -20 to 60 degree C
Hardware Overview
Specification
Interface
- Fiber Port
– 2 x 100/1000Base-X SFP - RJ-45 Port
– 4 x 10/100/1000Base-T RJ-45 - Console Port
– 1 x RS-232 to RJ-45 Serial Port - Terminal Block
– 1 x Digital Output (Alarm Relay)
Relay Output with current carrying
capacity of 1A @ 24VDC
– 1 x Digital Input (Dry Contact)
LED
- P1, P2, STA, ALM
- Ring, Ring Master, COM,
- Link/Act/Speed
Power Requirement
- Dual DC Input: 12~57 VDC
(4-pin removable terminal block) - Max. Power Consumption: 7.4W (25.2 BTU/h)
Hardware
- MAC Address Table: 2K
- Non-blocking Switching Fabric: 12Gbps
- Throughput @ 64Bytes: 8.928Mpps
- Jumbo Frame: 9K Bytes
- Packet Buffer: 1Mbit
- Store and Forward Switching Mechanism
- Auto-Cross over for MDI/MDI-X in TP ports
- Auto-Negotiation in TP Ports
- Full/Half Duplex Mode Operation
Environmental Condition
- Operation: -20˚C~60˚C
- Storage Temperature: -30˚C~70˚C
- Humidity: 5%~90% RH, Non-Condensing
Standards & Certifications
CE/FCC Class A
- Safety: EN/IEC 62368-1
- EMC: EN 55032 / EN 55035
- ESD
– Air Discharge: +/-8kV
– Contact Discharge: +/-4kV - EFT
– DC Input: +/-0.5kV
– Signal (RJ-45): +/-0.5kV - Surge Protection
– DC input +/-0.5kV
– Signal (RJ-45): +/-6kV
Freefall/Shock/Vibration
- IEC 60068-2-32
- IEC-60068-2-27
- IEC-60068-2-6
UKCA/RCM
RoHS 2.0
Dimension & Weight
- Size: 56.5 x 110 x 135 mm (W x D x H)
- Weight: 0.57 Kg
- Housing: Aluminum, IP30
Topology
Application Diagram
Model
Model | Fiber Slot | TP Port | Power Source | |||
Speed | Type | Slot | Speed | Port | ||
SRS-3106 | 100/1000 | SFP | 2 | 10/100/1000 | 4 | Dual 12~57V DC with 4-pin removable terminal block |
Download
Model | Info | Version | Download file |
SRS-3106 | Datasheet | A02 | |
SRS-3106 | User's Manual (HW) | V0.9 |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.