IPS-3106-SE-PB
6 Port Managed Industrial PoE+ Switch with 2-Port SFP
IPS-3106-SE-PB Industrial PoE Switch is the Fast & Gigabit Ethernet 10/100/1000Base-T to 100/1000Base-X Industrial PoE Switch.
The IPS-3106-SE-PB switches the traditional twist-pair RJ45 cable into various fiber optics media. It offers easy management of uplink port (2 x port fiber). The fiber optical port of IPS-3106-SE-PB can support various connection distances via multi-mode fiber, single-mode fiber or Bi-directional single-mode fiber for the deployment to the control room, warehouse or factory.
Environmental Condition Operation: -40˚C ~ 75˚C
Storage: -40˚C ~ 85˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 63 x 110 x 135 mm (W x D x H)
Weight: 0.92 Kg
Housing: Aluminum, IP30
Features
The IPS-3106-SE-PB Industrial PoE Switch provides perfect solution for delivering power over Ethernet for IP cameras, Wi-Fi access points or IP phones at an extended operating temperature (-40°C ~ 75°C ) to withstand against harsh environment for better performance. The IPS-3106-SE-PB is fully compliant with IEEE standards such as IEEE 802.3/802.3u/802.3ab/802.3z to ensure interoperability between network devices.
Power Over Ethernet
Data flows and the electrical current are carried over the same Ethernet cable. The feature can significantly reduce the otherwise extensive wiring installations
PoE Scheduling
Arrange the PoE schedule and specify the timing of PoE power-on and -off for each port to effectively manage the total power budget
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
Lightning Protection
Protect ports from power surges due to lightning or improper electrical wiring
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
Specification
Interface
- Fiber Port
– 2 x 100/1000Base-X SFP Slot - RJ-45 Port
– 4 x 10/100/1000Base-T RJ-45 with IEEE 802.3af/at PoE Injector - Console Port
– 1 x RS-232 to RJ-45 Serial Port - Terminal Block
– 1 x Digital Output (Alarm Relay)
– 1 x Digital Input
LED
- P1, P2, STA, ALM
- Master, Ring,
- Link/ACT, COM, PoE
Power Over Ethernet
- Total PoE budget: 120W
Power Requirement
- Dual DC Input: 24~54 VDC
(4-pin removable terminal block) - Max. Power Consumption: 135W (460.6 BTU/h)
Hardware
- MAC Address Table: 8K
- Non-blocking Switching Fabric: 12Gbps
- Throughput @ 64Bytes: 8.928Mpps
- Jumbo Frame: 9K Bytes
- Packet Buffer: 4.1Mbit
- Store and Forward Switching Mechanism
- Auto-Cross over for MDI/MDI-X in TP port
- Auto-Negotiation in TP Port
- Full/Half Duplex Mode Operation
Environment Condition
- Operation: -40˚C~75˚C
- Storage Temperature: -40˚C~85˚C
- Humidity: 5%~90% RH,
Non-Condensing
EMC/Safety
- CE, FCC Class A
- ITU-T K.21
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
Dimension & Weight
- Size: 63 x 110 x 135 mm (W x D x H)
- Weight: 0.92 Kg
- Housing: Aluminum, IP30
Topology
Application Diagram
Power Booster Technology
Model
Model | Fiber Port | TP Port | Support Power Source | |||
Speed | Type | Slot | Speed | Port | ||
IPS-3106-SE-PB | 100/1000 | SFP | 2 | 10/100/1000 | 4 | Dual 24~54V DC with 4-pin removable terminal block |
Download
Model | Info | Version | Download file |
IPS-3106-SE-PB | Datasheet | A03 | |
IPS-3106-SE-PB | User's Manual (HW) | V1.3 | |
IPS-3106-SE-PB | User's Manual (NMS) | V1.2 | |
IPS-3106-SE-PB | Firmware | 1.00.0J | |
IPS-3106-SE-PB | MIB-file | 1.00.0J |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.