FOS-3128
28-Port Management Full Gigabit Ethernet Fiber Switch
24 x 100/1000Mbps SFP + 4 x Gigabit Combo ports L2+ Managed Fiber Access Switch
FOS-3128 delivers wire-speed throughput for data, voice and IPTV services, using non-blocking 56Gbps switching fabric. 1+1 power supply design can provide seamless power changeover to reach sustainability of power if one of the power supplies failed. AC and battery powers can be mixed in the same unit for deployment flexibility.
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 440 x 205 x 44 mm (W x D x H)
Weight: 3.04 Kg
Features
FOS-3128 delivers wire-speed throughput for data, voice and IPTV services, using non-blocking 56Gbps switching fabric. 1+1 power supply design can provide seamless power changeover to reach sustainability of power if one of the power supplies failed. AC and battery powers can be mixed in the same unit for deployment flexibility.
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
Power Down Trap
Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
Fanless Design
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment
Specification
Interface
- Combo Port (Type):
4 x 100/1000Mbps Combo (SFP + RJ45) - SFP Slot (Type):
24 x 100/1000Mbps (SFP) - Console Port (Type):
1 x RS-232 Port (RJ-45)
LED
- Power A & B
- Status
- COM
- Speed/Link/Act
Power Requirement
- Input AC: 100V ~ 240V 50/60Hz
- Input DC: 48VDC
- Power Consumption: 30W
- External Battery Charging Interface: 12VDC/24Ah
Hardware
- MAC Address table: 16K
- Non-Blocking Switching Fabric: 56Gbps
- Packet Buffer: 1536K Bytes
- Jumbo Frame: 9K Bytes
- Store and Forward Switching Mechanism
- Auto-Cross Over for MDI/MDIX in TP Ports
- Auto-Negotiation in TP Ports
- Full/Half Duplex Mode Operation
Environmental Condition
- Operation: 0˚C ~ 50˚C
- Storage: -20˚C ~ 60˚C
- Humidity: 5% ~ 90%, Non-condensing
Dimension & Weight
- Size: 440 x 205 x 44 mm (W x D x H)
- Weight: 3.04 Kg
Model
Model | Downstream Port | Uplink Port | Power Source | ||||
Speed | Type | Port | Speed | Type | Port | ||
FOS-3128-1A | 100/1000 | SFP | 24 | 100/1000 | Combo ( SFP + RJ-45 ) | 4 | Fixed 1 Internal AC |
FOS-3128-2A | 100/1000 | SFP | 24 | 100/1000 | Combo ( SFP + RJ-45 ) | 4 | Fixed 2 Internal AC |
FOS-3128-1D | 100/1000 | SFP | 24 | 100/1000 | Combo ( SFP + RJ-45 ) | 4 | Fixed 1 Internal DC |
FOS-3128-2D | 100/1000 | SFP | 24 | 100/1000 | Combo ( SFP + RJ-45 ) | 4 | Fixed 2 Internal DC |
FOS-3128-1AD | 100/1000 | SFP | 24 | 100/1000 | Combo ( SFP + RJ-45 ) | 4 | Fixed 1 internal AC and |
Download
Model | Info | Version | Download file |
FOS-3128 | Datasheet | A07 | |
FOS-3128 | User's Manual (HW) | V1.1 | |
FOS-3128 | User's Manual (NMS) | V1.1 | |
FOS-3128 | Firmware | 1.10.0F | |
FOS-3128 | MIB-file | 1.10.0F |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.