FOS-3110
10-Port Management Full Gigabit Ethernet Fiber Switch
8 ports 100/1000Mbps SFP + 2 combo uplink ports (10/100/1000Mbps RJ-45 and 100/1000Mbps SFP) Managed Ethernet Switch
The FOS-3110 enterprise switch can be easily managed by Web GUI, telnet CLI, and SNMP. To fulfill the requirement of mass deployment, the device also supports the auto provisioning mechanism to allow the network managers to manage the device automatically and dynamically to save the OPEX. With CTS unique power down trap feature, FOS-3110 is able to send out a SNMP trap message when unexpected power outage occurs.
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 210 x 235 x 44 mm (W x D x H)
Weight: 1.5 Kg
Features
The FOS-3110 enterprise switch can be easily managed by Web GUI, telnet CLI, and SNMP. To fulfill the requirement of mass deployment, the device also supports the auto provisioning mechanism to allow the network managers to manage the device automatically and dynamically to save the OPEX. With CTS unique power down trap feature, FOS-3110 is able to send out a SNMP trap message when unexpected power outage occurs.
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Power Down Trap
Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Fanless Design
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
Specification
Interface
- Uplink Port (Type):
2 x 100/1000Mbps Combo (SFP + RJ45) - LAN Port (Type):
8 x 100/1000Mbps SFP - Console Port (Type):
1 x RS-232 Port (RJ-45) - Terminal Block
1 x Digital Input (Dry contact)
LED
- Power A & B
- Status
- COM
- Link/Act
Power Requirement
- Input AC:100V-240V 50/60Hz
- Power Consumption: 12W
Hardware
- MAC Address table : 8K
- Non-Blocking Switching Fabric : 20Gbps
- Memory buffer: 524K Bytes
- Jumbo frame : 9K Bytes
- Store and Forward Switching Mechanism
- Auto-Cross Over for MDI/MDUX in TP Ports
- Auto-Negotiation in TP Ports
- Full/Half Duplex Mode Operation
Environmental Condition
- Operation : 0˚C ~ 50˚C
- Storage Temperature : -20˚C ~ 60˚C
- Humidity:5%~90%, Non-condensing
Dimension & Weight
- Size: 210 x 235 x 44 mm (W x D x H)
- Weight: 1.5 Kg
Model
Model | Fiber Port | TP Port | Power Source | |||
Speed | Type | Port | Speed | Port | ||
FOS-3110-1A | 100/1000 | SFP | 10 | 10/100/1000 | 2 | Fixed 1 Internal AC |
Download
Model | Info | Version | Download file |
FOS-3110 | Datasheet | A01 | |
FOS-3110 | User's Manual (HW) | V1.1 | |
FOS-3110 | User's Manual (NMS) | V1.0 | |
FOS-3110 | Firmware | 1.00.11 | |
FOS-3110 | MIB-file | 1.00.11 |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.