EPS-3128
28-Port Management Gigabit PoE Ethernet Fiber Switch
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 440 x 310 x 44 mm (W x D x H)
Weight: 4.8 Kg
Features
EPS series is an advance and intelligent Switches, supporting PoE functions that simplifying and lowering the cost of PoE deployment as IP telephony, WLAN and IP surveillance in application.
The combination of QoS, security and multicast features allow service providers to successfully deploy triple-play services. (Data, Voice and Video).
Power Over Ethernet
Data flows and the electrical current are carried over the same Ethernet cable. The feature can significantly reduce the otherwise extensive wiring installations
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
PoE Scheduling
Arrange the PoE schedule and specify the timing of PoE power-on and -off for each port to effectively manage the total power budget
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Intelligent Diagnostics
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Specification
Interface
- TP Port:
– 24 x 10/100/1000Base-T RJ-45 with 802.3at/af PoE injector function
– 4 x 10/100/1000Base-T RJ-45 - SFP Slot:
4 x 100/1000Base-X SFP shared with port-25 to port-28 - Console Port:
1 x RS-232 to RJ-45 serial port
LED
- Power A/B
- COM
- Status
- Speed/Link/Act
- PoE
Power Requirement
- Input AC:100V-240V 50/60Hz
- Power Consumption (Max.):
– 260W (EPS-3128-240W)
– 500W (EPS-3128-480W) - Max. PoE Budget:
– 240W (EPS-3128-240W)
– 480W (EPS-3128-480W)
Hardware
- MAC Address table: 16K
- Non-blocking Switching Fabric: 56Gbps
- Throughput @ 64Bytes: 41.6Mpps
- Memory Buffer: 12Mbit
- Jumbo Frame: 9K Bytes
- Store and Forward Switching Mechanism
- Auto-cross Over for MDI/MDIX in TP Ports
- Auto-negotiation in TP Ports
- Full/Half Duplex Mode Operation
- PoE Power Output: max. 30W per port
- Max. PoE Budget:
– 240W at 40˚C, 210W at 50˚C (EPS-3128-240W)
– 480W at 40˚C, 420W at 50˚C (EPS-3128-480W) - Surge Protection in Ethernet Port (for LP models)
Environmental Condition
- Operation : 0˚C ~ 50˚C
- Storage : -20˚C ~ 60˚C
- Humidity:5%~90%, Non-condensing
Dimension & Weight
- Size: 440 x 310 x 44 mm (W x D x H)
- Weight: 4.8 Kg
Model
Model | Downstream Port | Uplink Port | ||||||
Speed | Type | Port | Surge Protection | PoE Budget | Speed | Port | Type | |
EPS-3128-240W | 10/100/1000 | RJ-45 | 24 | - | 240W | 100/1000 | 4 | Combo ( SFP+RJ-45 ) |
EPS-3128-480W | 10/100/1000 | RJ-45 | 24 | - | 480W | 100/1000 | 4 | Combo ( SFP+RJ-45 ) |
EPS-3128-240W-LP | 10/100/1000 | RJ-45 | 24 | 6KV | 240W | 100/1000 | 4 | Combo ( SFP+RJ-45 ) |
EPS-3128-480W-LP | 10/100/1000 | RJ-45 | 24 | 6KV | 480W | 100/1000 | 4 | Combo ( SFP+RJ-45 ) |
Download
Model | Info | Version | Download file |
EPS-3128 | Datasheet | A04 | |
EPS-3128 | User's Manual (HW) | V1.0 | |
EPS-3128 | User's Manual (NMS) | V1.0 | |
EPS-3128 | Firmware | 1.20.02 | |
EPS-3128 | MIB-file | 1.20.02 |
*To update the firmware, unzip the .zip file and upload the *.bin file.
*To use *.mib file for SNMP service, unzip the .zip file.