IPC-3012-PoE++
1-Port SFP to 1-Port 60W RJ-45 Gigabit Industrial PoE++ Media Converter
Connection Technology Systems (CTS) IPC-3012-PoE++ media converter is a Gigabit Ethernet 10/100/1000Base-T with 60W PoE++ to 100/1000Base-X media converter. The IPC-3012-PoE++ media converter converts traditional twisted-pair RJ-45 cable into various fiber media including multi-mode, single-mode with SC connectors or bidirectional WDM to fulfill different requirements depending on the deployment.
Environmental Condition Operation: -40˚C ~ 75˚C
Storage: -40˚C ~ 85˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 36 x 110 x 135 mm (W x D x H)
Weight: 0.62 Kg
Housing: Aluminum, IP30
Features
The IPC-3012-PoE++ media converter is designed for deployment at industrial sites. With DIN-Rail mounting, you can easily mount the industrial PoE media converter at your sites. The media converter supports two DC power inputs to provide redundancy and prevent any possible power loss and Relay output to serve as an alarm.
Power Over Ethernet
Data flows and the electrical current are carried over the same Ethernet cable. The feature can significantly reduce the otherwise extensive wiring installations
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Plug-and-play
No more complex, error-prone configuration prior to deployments, and maximum device compatibility in system integration
Lightning Protection
Protect ports from power surges due to lightning or improper electrical wiring
-Details You need to Know More-
– Provide 2 Gigabit RJ-45 Copper Ports & 2 SFP Ports 100FX or 1000BaseF(SX/LX/LH)
– Compatible with IEEE 802.3af/at PoE+ and up to 60W PoE++
– PoE Setting – Auto / Force Power
– Support 9K Jumbo Frames
– 6KV Surge Immunity on RJ-45 Copper Ports (K.21*)
– Dual Power Input (12~57VDC) & Built-in Power Booster
– Support 3 Operating Modes – Switch mode, Fiber Backup mode and Dual Media Converter mode
– Relay Output for Fault Alarm Notification (Power, Ports)
– Aluminum Housing
*K.21 is better than IEC 61000-4-5 Level 3 and designed for PoE Application and Outdoor environment
6KV Surge Immunity (K.21)
To fully protect customers’ deployed devices from surge damages, CTS adopts the test of K.21 surge protection enhanced level (6KV), with grounding installation, which approves resistibility of telecommunication equipment installed in customer premises if the surge comes from the Ethernet ports. Compared with IEC-61000-4-5, K.21 enhanced level test not only takes PoE applications into considerations, but assures way better to prevent voltage fluctuations and lightning for outdoor indusrial PoE applications.
Specification
Interface
- TP Port:
1 x 10/100/1000Base-T RJ-45 - F/O Port:
1 x 100/1000Base-X SFP
LED
- P1, P2
- ALM
- TP
- PoE
- SFP
Power Requirement
- DC Input:
– Terminal Block x 1 with two power inputs
– Input Voltage: 12 ~ 57VDC - Caution: Use 14AWG or better powering wire
- Power Consumption: 64.8W (Max.)
Hardware
- Store and Forward Switching Mechanism
- Auto-negotiation in Copper and Fiber Port
- MDI/MDIX Auto-crossover Supported
- Support Fault Alarm Notification (Power, Ports)
- Support Auto & Force Mode Configuration
- Support Full/Half Duplex Mode
- MAC Address Table: 2K
- Memory Buffer: 128K Bytes
- Relay Output
- Surge Protection: 6KV (K.21)
Environmental Condition
- Operating Temperature: -40° ~ 75°C
- Storage Temperature: -40° ~ 85°C
- Humidity: 5% ~ 90%, non-condensing
Dimension & Weight
- Size: 36 x 110 x 135 mm (W x D x H)
- Weight: 0.62Kg
- Housing: Aluminum, IP30
Topology
Model
Model | WAN Port | LAN Port | Power Source | ||||
Speed | Type | Port | Speed | PoE++ Port | PoE+ Port | ||
IPC-3012-PoE++ | 100/1000 | SFP | 1 | 10/100/1000 | 1 | - | Terminal Block with |
Download
Model | Info | Version | Download file |
IPC-3012-PoE++ | Datasheet | A03 | |
IPC-3012-PoE++ | User's Manual (HW) | V1.2 |