ESW-5112-2MG
8 x 10/100/1000Base-T RJ-45 +
2 x 100M/1G/2.5G/5G/10GBase-T RJ-45 +
2 x 1/10GBase-R SFP+
Managed Layer 2 Ethernet Switch
ESW-5112-2MG is a layer 2 managed Ethernet switch equipped with 8 ports of 10/100/1000Base-T RJ-45, 2 ports of 100M/1G/2.5G/5G/10GBase-T (compliant with NBase-T standard), and 2 ports of 1/10GBase-R SFP+. The SFP+ slots can accommodate a wide range of SFP/SFP+ transceivers including single-mode, multi-mode, and WDM.
Environmental Condition Operation: 0˚C ~ 50˚C
Storage: -20˚C ~ 60˚C
Humidity: 5% ~ 90%, Non-condensing
Dimension Size: 210 x 235 x 44 mm (W x D x H)
Weight: 1.8 Kg
Features
The fanless design reduces dust accumulation and power consumption, delivering zero-noise operation. Plus, ESW-5112-2MG is 8.5 inches in width, altogether making it the best solution for network infrastructure often hindered by scarce installation space.
Multi-G
As bandwidth demand soars to new heights, 100M/ 1G/2.5G/5G/10GBase-T ports allow users to get up to the speed of 2.5/5Gbps.
Power Down Trap
Notify NOC when power is shut off and so save the cost of deploying human resources for troubleshooting
Flexible IPTV Deployment
Designed with rich functions in facilitating multimedia streaming and providing a stable IPTV service with high quality
10G
Equipped with 10G data transmission capacity designed to fulfill the ever-increasing demand for higher bandwidth which is essential for traditional Internet service and premium service alike
Power Redundancy
Transition to the other redundant power module if either of the power sources is down
Multicast VLAN Registration
Reduce the bandwidth required to distribute IPTV multicast streams by means of sharing single traffic across different VLANs
Loop Detection
Automatically prevent the switching loops that cause network congestion and failures, and keep your service steadily running as planned
IPv4/IPv6 Dual Stack
Able to run IPv4 and IPv6 in parallel and be interoperable with other IPv4 / IPv6 / dual-stacked devices, which enables IPv6 management, IPv6 packet forwarding, and MLD v1/v2 Snooping
Intelligent Diagnostics
Allow system operational monitoring in real-time, and instantly fault-identify SFF-8472-specification-compatible optical modules according to user-defined threshold parameters
DHCP Auto Provisioning
Automatically upgrades the firmware and configuration from DHCP server to save maintenance cost
Dual Image
Safeguard against permanent system crash from firmware upgrade failures
Dual Rate Fiber
Automatically sense and adjust the fiber speed when changes are made in the network environment, and so facilitate a longer lifespan of the product
Fanless Design
Designed without a built-in fan which oftentimes results in constant annoying buzzing sounds. The feature prevents the harmful effects of a disruptive environment.
Hardware Overview
Specification
Interface
RJ-45 Port
– 8 x 10/100/1000Base-T RJ-45
– 2 x 100M/1G/2.5G/5G/10GBase-T RJ-45Fiber Port
2 x 10GBase-SR/LR SFP+Compatible with 1000Base-X
TransceiverConsole Port
1 x RS-232 to RJ-45 Serial PortTerminal Block
1 x Digital Input (Dry Contact)
LED
- Power A & B
- Status
- COM
- Speed/Link/Act
Dimension & Weight
- Size: 210 x 235 x 44mm (W x D x H)
- Weight: 1.8 kg
Power Requirement
- Input AC: 100V ~ 240V, 50/60Hz, 0.4 ~ 0.2A
- Input DC:
– 48V, 0.4A
– 12V, 3.33A (R7B Adapter) - Power Adapter: 100 ~ 240VAC, 48VDC
- Max. Power Consumption: 26.4W (90BTU/h)
Hardware
- MAC Address Table: 16K
- Non-Blocking Switching Fabric: 96Gbps
- Throughput @ 64Bytes: 71.4Mpps
- Packet Buffer: 12Mbit
- Jumbo Frame: 12K Bytes
- Store and Forward Switching Mechanism
- Auto-Cross Over for MDI/MDIX in TP Ports
- Auto-Negotiation in TP Ports
- Full/Half Duplex Mode Operation
Environmental Condition
- Operation: 0˚C ~ 50˚C*
- Storage: -20˚C ~ 60˚C
- Humidity: 5% ~ 90%, Non-condensing
EMC/Safety
- FCC Class A, CE
- ESD
– Air Discharge: +/-8kV
– Contact Discharge: +/-4kV - EFT
– AC Input: +/-1kV
– DC Input: +/-0.5kV
– Digital Input: +/-0.5kV - Surge Protection: +/-2kV
Topology
Application Diagram
Model
Model | Fiber Port | TP Port | Power Source | |||
Speed | Type | Port | Speed | Port | ||
ESW-5112-2MG-1A | 1/10 | SFP+ | 2 | 10/100/1000 Mbps 100M/1G/2.5G/5G/10Gbps | 8 2 | Fixed 1 Internal AC |
ESW-5112-2MG-1D | 1/10 | SFP+ | 2 | 10/100/1000 Mbps 100M/1G/2.5G/5G/10Gbps | 8 2 | Fixed 1 Internal DC 48V |
ESW-5112-2MG-1AE | 1/10 | SFP+ | 2 | 10/100/1000 Mbps 100M/1G/2.5G/5G/10Gbps | 8 2 | Fixed 1 Internal AC |
ESW-5112-2MG-1E | 1/10 | SFP+ | 2 | 10/100/1000 Mbps 100M/1G/2.5G/5G/10Gbps | 8 2 | Fixed 1 External DC 12V |
Download
Model | Info | Version | Download file |
ESW-5112-2MG | Datasheet | A03 | |
ESW-5112-2MG | User's Manual (HW) | V1.0 | |
ESW-5112-2MG | User's Manual (NMS) | V1.0 | |
ESW-5112-2MG | Firmware | 1.00.0S | |
ESW-5112-2MG | MIB-file | 1.00.0S |